Parallel scanner does not work due to configuration conflict.
Cause:
Configuration conflict.
Solution:
Correct configuration conflict.
1) Click the 'Start' to display the 'Start' menu.
2) Select 'Settings' and select 'Control Panel'. (The 'Control Panel' window appears.)
'Control Panel'
3) Double-click the 'System' icon.
'System' icon
4) Click the 'Device Manager' tab.
5) Double-click 'Ports (COM & LPT)'.
Ports (COM & LPT)
6) Double-click on the LPT1 port listed.
7) Click the 'Resources' tab.
Check the 'Conflicting Device List' box for conflicts with another device.
Conflicting Device List
If yes, note the IRQ address that it is conflicting.
8) Click 'Cancel'.
9) Select the 'Interrupt request (IRQ)'.
10) Double-click 'Computer'.
Computer
11) Check the list of the IRQ number assigned to each device on the computer. Determine an IRQ number that is not used by another device.
IRQ number assigned
12) Click 'Cancel'.
13) Double-click the LPT1 port.
14) Click the 'Resources' tab.
15) If 'Use automatic settings' is selected, clear it.
Use automatic settings
16) In the 'Resource Listings' box, double-click on 'Interrupt Request'.
Interrupt Request
17) In the 'Value' box, type the new IRQ number for the sound card. Choose 'OK' from each dialog box until the 'Control Panel' appears.
'Value' box
